Levitating rod magnet
The rod magnet levitates thanks to the strong repulsion of equal poles
Online since: 07/04/2010,
Number of visits: 345110
1
This project is about the strong repulsion of equal magnetic poles.
You need:
- Adhesive tape
- Two straight pieces of wood
- Rod magnets: Technically, all types will do, but the longer the rod magnet the more the equal poles repel each other. In this project we used 10 S-04-25-N rod magnets.
The assembly is simple:
1.
Divide the 10 rod magnets into three pieces: one with four magnets and two with three magnets.
2.
Identify north and south pole on each piece (see FAQ north pole).
3.
Mark north and south pole of the three pieces with coloured adhesive tape.
4.
Use adhesive tape to glue the two shorter pieces on a piece of wood.
5.
Place the second piece of wood perpendicular to the other.
6.
Carefully prop the long magnetic rod against the perpendicular wood and then let go.
Result: The long rod levitates above the others!
The blue marks symbolise the north or south poles of the assembled rods
Articles used
Load...
Rod magnet Ø 4 mm, height 25 mm, holds approx. 670 g, neodymium, N42, nickel-plated
| 5 pcs. | 1,00 EUR ea.* | |
| from | 15 pcs. | 0,88 EUR ea.* |
| from | 40 pcs. | 0,78 EUR ea.* |
| from | 80 pcs. | 0,72 EUR ea.* |
| Ask for a rebate from 600 pcs. | ||
Available: 8 045 pcs.
One person likes this customer project
-Projects are bookmarked in your customer account
keywords
The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.
Copying the content or using it elsewhere is not permitted without explicit approval.