Mounting camping chairs

Space-saving storage of chairs in a converted camper van

Author: Christian Walter, Illingen

Online since: 21/06/2012, Number of visits: 337067

Camping chairs attach to the inside of the hatch thanks to magnets

Attached chairs with the hatch open

Last year we converted a VW T4 into a camper van. We decided to attach the camping chairs to the hatch to keep them out of the way during the loading and unloading of the boot.

Because the chairs still weigh about 4 kg despite their lightweight design, we chose to mount them with 3 pot magnets CSN-25 per chair.

The biggest advantage: It is super easy to remove and reattach the chairs (without inconvenient tie-down).

The magnets were attached to an extra piece of wood panelling, the counterpart in each case is a pipe clamp and an M8 screw to mount the metal disc (secured with a washer and nut).

Note from the supermagnete team: Instead of this somewhat elaborate construction with pipe clamp and screw, the metal counterparts could also be mounted directly onto the chairs (see link below).

We used 3 magnets per chair.

This mounting option has already proven itself useful several times and always causes quite a stir at the campsite.

A note from the supermagnete team: In the event of a car accident, it is very likely that the chairs would come loose and be catapulted through the air. Having said that, an unsecured or poorly tied-down chair in the boot presents a danger equally as great.

Should you decide to try this application: Secure your load in such a way that you and your passengers will be safe during an accident. We recommend to use a safety net to separate the boot from the passenger compartment.

Articles used

CSN-25

neodymium pot magnet Ø 25 mm with countersunk hole, holds approx. 19 kg,

	1 pc.	4,51 EUR ea.*
from	3 pcs.	3,97 EUR ea.*
from	10 pcs.	3,46 EUR ea.*
from	20 pcs.	3,22 EUR ea.*
from	40 pcs.	3,01 EUR ea.*
Ask for a rebate from 220 pcs.

Available: 220 280 pcs.

MSD-26

metal discs with an edge and countersunk hole M4, inner diameter 26 mm, as a counterpart to magnets, these are not magnets!
Counteracts shear force.

	10 pcs.	1,61 EUR ea.*
from	20 pcs.	1,53 EUR ea.*
from	40 pcs.	1,46 EUR ea.*
Ask for a rebate from 3 000 pcs.

Available: 3 600 pcs.

MD-27

metal discs with countersunk hole Ø 27 mm, as a counterpart to magnets, these are not magnets!

	10 pcs.	0,47 EUR ea.*
from	40 pcs.	0,40 EUR ea.*
from	80 pcs.	0,38 EUR ea.*
from	160 pcs.	0,36 EUR ea.*
Ask for a rebate from 3 000 pcs.

Available: 25 560 pcs.

ZTN-25

neodymium pot magnet Ø 25 mm with counterbore hole, holds approx. 14 kg,

	1 pc.	3,99 EUR ea.*
from	3 pcs.	3,46 EUR ea.*
from	10 pcs.	3,00 EUR ea.*
from	20 pcs.	2,77 EUR ea.*
from	40 pcs.	2,57 EUR ea.*
Ask for a rebate from 200 pcs.

Available: 8 255 pcs.

0 people like this customer project -Projects are bookmarked in your customer account

This might also interest you

Hooking up a trailer

Magnetic loop hanger

Ultralight vehicle for Shell Eco Marathon

Attaching a shade sail

keywords

Attaching ( 136 )
Hobby ( 75 )
Wood ( 109 )
Outside ( 77 )
Car ( 23 )
Useful ( 234 )
Camper ( 25 )

The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.