Closing a closet door with magnets

How to reliably keep doors closed

Author: supermagnete, Uster, [email protected]

Online since: 15/11/2011, Number of visits: 566920

Table of Contents

Version 1: Lock casing as counterpart

The closet door is closed with a pot magnet

We found a pretty and simple closet-closing solution in our main office in Uster:

We screwed a pot magnet 20 mm on a piece of wood, but didn't tighten the screw all the way, so that the magnet remains slightly movable. This makes for a solid contact, even when the magnet doesn't meet the counterpart all the way vertically.

Then we screwed the piece of wood to the inside of the closet.

Our counterpart is the iron lock casing on the inside of the door. We sanded down the paint for better contact.

When you close the closet door, the magnet and the lock casing connect perfectly. The clicking sound it makes is very satisfying :-).

Tip:If the lock casing of your closet is not made of iron, you can glue or screw a metal disc of the same size on the closet door as a counterpart. The suitable products are linked below.

Thanks to this solution we were able to attach big handles to the closet door, which makes opening the doors much easier than using a key, which we don't need anymore.

The sturdy handles are necessary, because the doors can only be opened with a jerk now. Pot magnets CSN-ES-16 would probably be sufficient, as long as magnet and lock casing have direct contact.

The solution proved to be worthwhile - it is maintenance-free and never fails to surprise our visitors.

You can find more on the topic of doors in our FAQ Which magnets are suitable for doors and closet doors?.

Version 2: Sheet iron as counterpart

Addition from Andres Bührer, Freiamt (Germany):

All the latches of my three wardrobe doors broke over time. To keep the doors shut, I replaced the latches with CSN-13 pot magnets - two per door are sufficient.

I screwed sheet iron on the top and on the bottom of the wardrobe to which countersunk pot magnets stick tightly at direct contact. As a spacer I screwed a CSN-13 countersunk pot magnet with a nut and a washer on the top of the wardrobe door. I left the old fittings where they were and just attached the magnetic system beside them.

The wardrobe door can be closed again, thanks to a sheet steel angle and magnet

On the bottom edge of the wardrobe door I screwed the CSN-13 directly to the wardrobe door. I just attached the sheet steel angle to the magnet on the bottom, closed the door, and then screwed the sheet iron on the bottom of the wardrobe accordingly.

I left the keys in the locks, so I can still use them as handles to open and close the doors. The 3 kg adhesive force of the CSN-13 works well. Smaller magnets would be too weak for this application.

Our assortment also includes magnets specifically for furniture and doors:

Articles used

CSN-20

neodymium pot magnet Ø 20 mm with countersunk hole, holds approx. 8,9 kg,

	1 pc.	3,21 EUR ea.*
from	3 pcs.	2,79 EUR ea.*
from	10 pcs.	2,43 EUR ea.*
from	20 pcs.	2,25 EUR ea.*
from	40 pcs.	2,09 EUR ea.*
Ask for a rebate from 260 pcs.

Available: 132 117 pcs.

MD-23

metal discs with countersunk hole Ø 23 mm, as a counterpart to magnets, these are not magnets!

	10 pcs.	0,39 EUR ea.*
from	40 pcs.	0,34 EUR ea.*
from	80 pcs.	0,31 EUR ea.*
from	160 pcs.	0,29 EUR ea.*
Ask for a rebate from 2 500 pcs.

Available: 34 580 pcs.

PAS-20

metal discs self-adhesive Ø 20 mm, as a counterpart to magnets, these are not magnets!

	10 pcs.	0,34 EUR ea.*
from	40 pcs.	0,29 EUR ea.*
from	80 pcs.	0,27 EUR ea.*
from	160 pcs.	0,25 EUR ea.*
Ask for a rebate from 1 900 pcs.

Available: 10 520 pcs.

MSD-21

metal discs with an edge and countersunk hole M3, inner diameter 21 mm, as a counterpart to magnets, these are not magnets!
Counteracts shear force.

	10 pcs.	1,50 EUR ea.*
from	20 pcs.	1,41 EUR ea.*
from	40 pcs.	1,35 EUR ea.*
Ask for a rebate from 3 000 pcs.

Available: 3 180 pcs.

ZTN-20

neodymium pot magnet Ø 20 mm with counterbore hole, holds approx. 6 kg,

	1 pc.	3,35 EUR ea.*
from	3 pcs.	2,90 EUR ea.*
from	10 pcs.	2,51 EUR ea.*
from	20 pcs.	2,31 EUR ea.*
from	40 pcs.	2,14 EUR ea.*
Ask for a rebate from 220 pcs.

Available: 4 317 pcs.

CSN-13

neodymium pot magnet Ø 13 mm with countersunk hole, holds approx. 3 kg,

	5 pcs.	1,61 EUR ea.*
from	15 pcs.	1,39 EUR ea.*
from	40 pcs.	1,22 EUR ea.*
from	80 pcs.	1,13 EUR ea.*
Ask for a rebate from 350 pcs.

Available: 238 470 pcs.

0 people like this customer project -Projects are bookmarked in your customer account

This might also interest you

Attaching a car curtain

Tool for plasterer

Tidying up remote controls

Hand towel holder

keywords

supermagnete-tested ( 38 )
Sitting-room ( 90 )
Low priced ( 161 )
Easy ( 200 )
Useful ( 234 )
Furniture ( 29 )
DIY ( 80 )
Closing ( 20 )
Door ( 11 )

The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.